|
|
|
Routers
Ascend - Pipeline 50 and 75 RoutersThe Ascend Pipeline® 75 is an Ethernet-to-ISDN bridge/router that gives telecommuters and remote offices the flexibility to establish seamless connections that deliver voice and data between home offices and the corporate network or the Internet. The Pipeline 75 also offers bandwidth on demand capabilities. The Pipeline 50® is an Ethernet-to-ISDN router/bridge that uses a high-speed ISDN line and bandwidth on demand technology to connect remote locations to a corporate site and digital technology to provide transparent connections that are free of the corruption and noise found with analog solutions. Cisco 2500 SeriesThe Cisco 2500 Series of ethernet and token ring routers provide a wide range of branch office solutions including integrated router/hub and router/access server models. The Cisco 2500 series routers provide a variety of models designed for branch office and remote site environments. These routers are typically fixed configuration with at least two of the following interfaces:
NetSpan MultiRouter LTUp to four LocalTalk networks can be interconnected with one NetSpan MultiRouter LT. LocalTalk connectors are required for each LocalTalk port. A power transformer (see below for part numbers and descriptions) must be ordered separately.
NetSpan MultiRouter EN/LTTwo LocalTalk networks and one Ethernet network can be interconnected with one NetSpan MultiRouter EN/LT. An Apple AUI transceiver of the appropriate type is required for the AAUI models. Built-in 10Base-T is included with the AUI models. Otherwise, an AUI transceiver of the appropriate type is required. LocalTalk connectors are required for each LocalTalk port. A power transformer (see below for part numbers and descriptions) must be ordered separately.
NetSpan MultiRouter ENUp to two Ethernet networks can be interconnected with one NetSpan MultiRouter EN. Apple AUI transceivers of the appropriate type are required for the AAUI models. Built-in 10Base-T is included with the AUI models. Otherwise, AUI transceivers of the appropriate type are required. A power transformer (see below for part numbers and descriptions) must be ordered separately.
NetSpan MultiRouter LT/ModemUp to two LocalTalk networks can be connected to a remote site using a built-in V.32 bis modem. An upgrade to a built-in V.34 modem is anticipated later in the year. LocalTalk ® or PhoneNet® connectors are required for each LocalTalk port. A power transformer (see below for part numbers and descriptions) must be ordered separately.
NetSpan MultiRouter EN/ModemOne Ethernet network can be connected to a remote site using a built-in V.32 bis modem. An upgrade to a built-in V.34 modem is anticipated later in the year. An Apple AUI transceiver of the appropriate type is required for the AAUI models. Built-in 10Base-T is included with the AUI models. Otherwise, an AUI transceiver of the appropriate type is required. A power transformer (see below for part numbers and descriptions) must be ordered separately.
NetSpan MultiRouter LT/SyncUp to two LocalTalk networks can be connected to a remote site using a high speed serial port. LocalTalk ® or PhoneNet® connectors are required for each LocalTalk port. An Apple AUI transceiver of the appropriate type is required for the AAUI models. Built-in 10Base-T is included with the AUI models. Otherwise, an AUI transceiver of the appropriate type is required. A cable is required for all MultiRouter Sync models that connect to the DB-25 connector on one end and to the standard RS-232, RS-422, or V.35 connectors on the other end. A power transformer (see below for part numbers and descriptions) must be ordered separately.
NetSpan MultiRouter EN/SyncOne Ethernet network can be connected to a remote site using a high speed serial port. An Apple AUI transceiver of the appropriate type is required for the AAUI models. Built-in 10Base-T is included with the AUI models. Otherwise, an AUI transceiver of the appropriate type is required. A cable is required for all MultiRouter Sync models that connect to the DB-25 connector on one end and to the standard RS-232, RS-422, or V.35 connectors on the other end. A power transformer (see below for part numbers and descriptions) must be ordered separately.
Please call for current models and prices Visit the NetSpan Products Page
|
|
Trademarks: NetSpan, the NetSpan logo and Multirouter are registered trademarks of NetSpan Corporation. MultiStar, Route Manager and Your Route to Internetwork Communications are trademarks of NetSpan Corporation. Send mail to feedback@netspan.com with
questions or comments about this web site.
|